Dreame RZ601 Pro Front Control Gas Range

This is a built-in appliance. Please contact an authorized service provider for assistance. Installation work and earthing must be done by qualified professional(s) in accordance with local electrical codes.

Perform a "burn-in" process to remove the protective oil coatings and odors from manufacturing:
Remove all racks and accessories.
Set the oven to [Bake] at 400°F (approx. 200°C) and run for 1 hour.
Set the oven to [Broil] and run for 30 minutes.
Smoke and odors during this process are normal. Ensure the kitchen is well-ventilated.

These sounds are completely normal.
Clicking: The thermostat or relays cycle on and off to maintain precise temperature control.
Fan noise: The cooling fan runs during operation and will continue after shutdown until the interior cools below 165°F.
Crackling: The oven's metal interior naturally expands and contracts during heating and cooling cycles.

No preheating required. Air Fry uses high-speed hot air circulation to achieve a crispy texture.
Optimal Placement: Use rack position 3 for best results.
Cookware Tip: Use an air fry tray or basket; dark cookware is recommended to enhance browning.

The probe is compatible with [Bake], [Conv Bake], and [Conv Roast] modes.
Insert the probe fully into the thickest part of the meat (avoid bone, fat, or gristle).
Plug the probe connector into the outlet inside the oven.
Select your cooking mode and set the desired internal target temperature.
Then set the oven cooking temperature.
Press [START]. The oven stops automatically when the target temperature or set time is reached.
IMPORTANT: Remove the probe before Self Clean or Broil cycles to prevent damage.

Self Clean uses very high heat to turn grease and residue into ash. Strictly follow all manual instructions during this cycle.

Stainless Steel: Clean with mild soapy water, wiping in the direction of the grain. Specialized stainless steel cleaners are also recommended. Avoid steel wool, abrasive powders, or chlorine-based cleaners. Glass Door: Use glass cleaner or mild soapy water. Never use blades or abrasive tools, as they can damage the glass.

Disconnect the power and contact customer support. The light must be replaced by a qualified professional in accordance with local electrical codes.

This indicates the control system has detected a malfunction.
Press [CLEAR OFF] to reset.
Turn off the circuit breaker for 5 minutes, then restore power.
Try operating the oven again.
If the error code persists, record the specific code and contact an authorized service center. Do not use the oven while an error code is displayed.

Please check the following:
Check if other household appliances have power to rule out a general outage.
Check if the dedicated circuit breaker has tripped. Reset the breaker if necessary.
Ensure the power cord is properly plugged into the outlet.
Contact customer support for a professional inspection if the issue persists.

This mode is designed for users observing the Jewish Sabbath. When enabled:
Oven lights, tones, convection, broil, keep warm, proof, and all timers are disabled.
Only traditional [Bake] mode is available for up to 74 hours, allowing use during the Sabbath without manual activation.

Control Lock may be enabled. Check the display for a lock icon. To unlock, press and hold [Settings] for 3 seconds until the icon disappears. This feature prevents accidental operation by children.

This is a built-in appliance. Please contact an authorized service provider for assistance. Installation work and earthing must be done by qualified professional(s) in accordance with local electrical codes.

Perform a "burn-in" process to remove the protective oil coatings and odors from manufacturing:
Remove all racks and accessories.
Set the oven to [Bake] at 400°F (approx. 200°C) and run for 1 hour.
Set the oven to [Broil] and run for 30 minutes.
Smoke and odors during this process are normal. Ensure the kitchen is well-ventilated.

These sounds are completely normal.
Clicking: The thermostat or relays cycle on and off to maintain precise temperature control.
Fan noise: The cooling fan runs during operation and will continue after shutdown until the interior cools below 165°F.
Crackling: The oven's metal interior naturally expands and contracts during heating and cooling cycles.

No preheating required. Air Fry uses high-speed hot air circulation to achieve a crispy texture.
Optimal Placement: Use rack position 3 for best results.
Cookware Tip: Use an air fry tray or basket; dark cookware is recommended to enhance browning.

The probe is compatible with [Bake], [Conv Bake], and [Conv Roast] modes.
Insert the probe fully into the thickest part of the meat (avoid bone, fat, or gristle).
Plug the probe connector into the outlet inside the oven.
Select your cooking mode and set the desired internal target temperature.
Then set the oven cooking temperature.
Press [START]. The oven stops automatically when the target temperature or set time is reached.
IMPORTANT: Remove the probe before Self Clean or Broil cycles to prevent damage.

Self Clean uses very high heat to turn grease and residue into ash. Strictly follow all manual instructions during this cycle.

Stainless Steel: Clean with mild soapy water, wiping in the direction of the grain. Specialized stainless steel cleaners are also recommended. Avoid steel wool, abrasive powders, or chlorine-based cleaners. Glass Door: Use glass cleaner or mild soapy water. Never use blades or abrasive tools, as they can damage the glass.

Disconnect the power and contact customer support. The light must be replaced by a qualified professional in accordance with local electrical codes.

This indicates the control system has detected a malfunction.
Press [CLEAR OFF] to reset.
Turn off the circuit breaker for 5 minutes, then restore power.
Try operating the oven again.
If the error code persists, record the specific code and contact an authorized service center. Do not use the oven while an error code is displayed.

Please check the following:
Check if other household appliances have power to rule out a general outage.
Check if the dedicated circuit breaker has tripped. Reset the breaker if necessary.
Ensure the power cord is properly plugged into the outlet.
Contact customer support for a professional inspection if the issue persists.

This mode is designed for users observing the Jewish Sabbath. When enabled:
Oven lights, tones, convection, broil, keep warm, proof, and all timers are disabled.
Only traditional [Bake] mode is available for up to 74 hours, allowing use during the Sabbath without manual activation.

Control Lock may be enabled. Check the display for a lock icon. To unlock, press and hold [Settings] for 3 seconds until the icon disappears. This feature prevents accidental operation by children.